array(1) { ["wp-wpml_current_language"]=> string(2) "en" }
SLTC universal lamellar flap disc Ø 115 mm zirconia alumina (with active abrasive surface layer) grain 36 | dished

NAWAROFLEX® – with the carrier made of renewable raw materials

SLTC universal lamellar flap disc Ø 115 mm zirconia alumina (with active abrasive surface layer) grain 36 | dished

SKU: A27031150360127
Packaging unit: 10 pcs.

Recommended use

Stainless steel
Steel
Cast material

Benefits

Nawaroflex is made using renewable raw materials and is available exclusively at LUKAS. In addition, the lightweight material allows for easy tool handling.
Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
The abrasive surface layer of the abrasive cloth makes it easier for you to work with it. Thanks to the cool grinding, blue discolouration and glazing are a thing of the past.
A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.
Your added value
Made with renewable raw materials
Maximum tool life thanks to multi-layer abrasive coating
No blue discolouration means less reworking
Self-sharpening effect: high removal rate especially on stainless steel
Lightweight carrier material for low tool weight
Fresh abrasive coating every time: wear exposes the flaps underneath
Finished faster thanks to the highest removal rate
Secure working even at high operating speeds and temperature thanks to special resin bond
Extremely hard and sharp for an impressively long tool life
Available with Nawaroflex exclusively at LUKAS
Can be used for a long time – no glazing of abrasive grain
Environmentally friendly production using state-of-the-art resin curing technology
Also machines hard materials efficiently
Can be used with any commercially available angle grinder thanks to 22.23 mm bore
Proven quality: high level of safety by regular tests
Material
Alloyed/cast steels
best suitable
Tool steel
best suitable
Rust-/acid-/and heat-resistant steel and cast steel
best suitable
Cast iron
best suitable
Titanium and nickle alloys
best suitable
More applications
Chamfering
-
Drilling
-
Brushes
-
Deburring
best suitable
Fine grinding
best suitable
Milling
-
Engraving
-
Fettling
-
Fillet weld grinding
-
Paint removal
best suitable
Polishing
-
Precision machining
-
Cleaning
best suitable
Conditioning
suitable
Rough grinding
-
Weld seam machining
-
Dash-dot matting
suitable
Cutting
-
Roughening
suitable