array(1) { ["wp-wpml_current_language"]=> string(2) "en" }
SLTflex universal lamellar flap disc Ø 125 mm ceramic grain 60 flat

Patented LUKAS flap shape for flexible machining difficult-to-reach areas

SLTflex universal lamellar flap disc Ø 125 mm ceramic grain 60 flat

SKU: A272712506070
Packaging unit: 10 pcs.

Recommended use

Stainless steel
Titanium
Steel

Benefits

Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly.
The tool's small resin core with M14 thread enables a large flap projection. This makes the grinding disc flexible, it can adapt itself to uneven surfaces, and requires little effort when working. With its long tool life, it is ideally suitable for fillet weld grinding. There is no risk of the workpiece being damaged by the carrier.
Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
Your added value
High and fast removal rate, especially on hardened surfaces, scale, hard coatings and reinforced weld seams
Ideally suited for fillet weld grinding – perfectly rounds off weld seams
Maximum tool life thanks to multi-layer abrasive coating
Also machines hard materials efficiently
Perfect result even on uneven surfaces
Fresh abrasive coating every time: wear exposes the flaps underneath
Secure working even at high operating speeds and temperature thanks to special resin bond
Quick and easy mounting without a clamping wrench
Flexible structure: near-zero vibration during use
Environmentally friendly production using state-of-the-art resin curing technology
Long tool life
No contact between carrier and the workpiece: Prevents damage
For universal use
Long tool life
Finished faster thanks to the highest removal rate
Time-saving work thanks to flexible contact area
Can be used for a long time – no glazing of abrasive grain
Quick and easy mounting without a clamping wrench thanks to the integrated M14 thread
Proven quality: high level of safety by regular tests
Material
Steel and cast steel
best suitable
Alloyed/cast steels
best suitable
Tool steel
best suitable
Rust-/acid-/and heat-resistant steel and cast steel
best suitable
Cast iron
suitable
Aluminium, magnesium and copper alloys
best suitable
Titanium and nickle alloys
best suitable
More applications
Chamfering
best suitable
Drilling
-
Brushes
-
Deburring
best suitable
Fine grinding
-
Milling
-
Engraving
-
Fettling
-
Fillet weld grinding
best suitable
Paint removal
-
Polishing
-
Precision machining
-
Cleaning
-
Conditioning
-
Rough grinding
best suitable
Weld seam machining
best suitable
Dash-dot matting
-
Cutting
-
Roughening
suitable

Description

This flexible lamellar flap disc for machining hard-to-reach areas are the perfect alternative to grinding discs or conventional lamellar flap discs. It is perfect for deburring, fettling, derusting, smoothening and weld seam machining. The small resin core with practical M14 thread allows for a larger flap projection. This makes the grinding disc flexible, it can adapt itself to uneven surfaces, and requires little effort when working. With its long tool life, it is ideally suitable for fillet weld grinding. There is no risk of the workpiece being damaged by the carrier. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the innovative ceramic abrasive grain, the flap disc always stays perfectly sharp. During use, ceramic particles break off and make space for new ones with sharp cutting edges. Tool replacement is significantly reduced – lowering tool costs. Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Technical information

Weight0.182 kg
Dimensions0.13 × 0.13 × 0.155 m
Tool shape

Grain size

n max.

Product packaging

Lamellar flap disc type

Abrasive

Safety standard

V max.

Packaging labelling

Tool holder

Tool holder dimension

Tool diameter

Tags