array(1) { ["wp-wpml_current_language"]=> string(2) "en" }
SLTs-flex universal lamellar flap disc Ø 178 mm zirconia alumina grain 80 flat

Patented LUKAS flap shape for extremely flexible machining of difficult-to-reach areas

SLTs-flex universal lamellar flap disc Ø 178 mm zirconia alumina grain 80 flat

SKU: A272917808018
Packaging unit: 10 pcs.

Recommended use

Stainless steel
Steel
Aluminium

Benefits

Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
The abrasive surface layer of the abrasive cloth makes it easier for you to work with it. Thanks to the cool grinding, blue discolouration and glazing are a thing of the past.
Thanks to their soft material, the upright flaps of this tool enable flexible use on uneven workpieces as well. They achieve excellent surface results without any damaging vibration.
A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.
Your added value
Maximum tool life thanks to multi-layer abrasive coating
No blue discolouration means less reworking
Perfect result even on uneven surfaces
Self-sharpening effect: high removal rate especially on stainless steel
Fresh abrasive coating every time: wear exposes the flaps underneath
Finished faster thanks to the highest removal rate
Flexible structure: near-zero vibration during use
Secure working even at high operating speeds and temperature thanks to special resin bond
Extremely hard and sharp for an impressively long tool life
Quick and easy mounting without a clamping wrench
Can be used for a long time – no glazing of abrasive grain
Environmentally friendly production using state-of-the-art resin curing technology
Also machines hard materials efficiently
Quick and easy mounting without a clamping wrench thanks to the integrated M14 thread
Proven quality: high level of safety by regular tests
Material
Steel and cast steel
best suitable
Alloyed/cast steels
best suitable
Tool steel
best suitable
Rust-/acid-/and heat-resistant steel and cast steel
best suitable
Cast iron
suitable
Aluminium, magnesium and copper alloys
suitable
Titanium and nickle alloys
suitable
More applications
Chamfering
-
Drilling
-
Brushes
-
Deburring
best suitable
Fine grinding
suitable
Milling
-
Engraving
-
Fettling
-
Fillet weld grinding
suitable
Paint removal
-
Polishing
-
Precision machining
-
Cleaning
-
Conditioning
-
Rough grinding
best suitable
Weld seam machining
best suitable
Dash-dot matting
-
Cutting
-
Roughening
suitable

Description

This super-flexible lamellar flap disc for machining hard-to-reach areas is the perfect alternative to grinding discs or conventional lamellar flap discs. It is perfect for deburring, fettling, derusting, smoothening and weld seam machining. The small resin core with the practical M14 thread enables an even larger flap projection (than with the SLT-flex). This makes the grinding disc extremely flexible, it can adapt itself to uneven surfaces, and requires little effort when working. With its long tool life, it is ideally suitable for fillet weld grinding. There is no risk of the workpiece being damaged by the carrier. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel. The abrasive grain of this flap disc is perfectly aligned by means of an abrasive surface layer and a special scattering process during the production. The tool does not become clogged, is sharper, requires little effort when working with it, and does not even cause blue discolouration or glazing. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Technical information

Weight0.342 kg
Dimensions0.185 × 0.18 × 0.17 m
Tool shape

Grain size

n max.

Product packaging

Lamellar flap disc type

Abrasive

Safety standard

V max.

Packaging labelling

Tool holder

Tool holder dimension

Tool diameter

Tags