array(1) { ["wp-wpml_current_language"]=> string(2) "en" }
SLTT universal lamellar flap disc Ø 125 mm zirconia alumina (with active abrasive surface layer) grain 60 | flat

The turbo-charged flap disc for perfectly machining stainless steels

SLTT universal lamellar flap disc Ø 125 mm zirconia alumina (with active abrasive surface layer) grain 60 | flat

SKU: A27201250600045
Packaging unit: 10 pcs.

Recommended use

Stainless steel
Steel

Benefits

The tool's steel carrier plate is exclusively available from LUKAS. The stable and robust carrier offers maximum reliability (no breakage) and is therefore also suitable for use with robot systems. The good heat dissipation also ensures cool grinding and practically eliminates the need for reworking.
Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Outstanding removal rates are guaranteed.
The abrasive surface layer of the abrasive cloth makes it easier for you to work with it. Thanks to the cool grinding, blue discolouration and glazing are a thing of the past.
A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.
The tool's steel carrier plate is exclusively available from LUKAS. The stable and robust carrier offers maximum reliability (no breakage) and is therefore also suitable for use with robot systems. The good heat dissipation also ensures cool grinding and practically eliminates the need for reworking.
Your added value
Maximum tool life thanks to multi-layer abrasive coating
cost-effective by maximum usage of the entire abrasive coating thanks to specially shaped flaps
No blue discolouration means less reworking
Self-sharpening effect: high removal rate especially on stainless steel
No blue discolouration thanks to optimised heat dissipation: less reworking needed
Fresh abrasive coating every time: wear exposes the flaps underneath
More abrasive grains in the outer area for a high grinding speed
Finished faster thanks to the highest removal rate
Secure working even at high operating speeds and temperature thanks to special resin bond
Extremely hard and sharp for an impressively long tool life
Also ideal for use with robot systems
Higher performance, work speed and better surface results than with a grinding disc
Can be used for a long time – no glazing of abrasive grain
Environmentally friendly production using state-of-the-art resin curing technology
Also machines hard materials efficiently
Lower vibration – more pleasant working
Also ideal for machining weld seams
LUKAS exclusive
Higher safety thanks to an optimised bond of the flaps
Excellent use of abrasive grains thanks to a flat arrangement for a long tool life
Quieter: 50% less noise than common grinding discs
Innovative tool: LUKAS exclusive
Can be used with any commercially available angle grinder thanks to 22.23 mm bore
Proven quality: high level of safety by regular tests
Material
Steel and cast steel
suitable
Alloyed/cast steels
suitable
Tool steel
suitable
Rust-/acid-/and heat-resistant steel and cast steel
best suitable
More applications
Chamfering
best suitable
Drilling
-
Brushes
-
Deburring
best suitable
Fine grinding
-
Milling
-
Engraving
-
Fettling
-
Fillet weld grinding
-
Paint removal
-
Polishing
-
Precision machining
-
Cleaning
-
Conditioning
-
Rough grinding
best suitable
Weld seam machining
best suitable
Dash-dot matting
-
Cutting
-
Roughening
suitable