array(1) { ["wp-wpml_current_language"]=> string(2) "en" }
V2 POWER lamellar flap disc Ø 125 mm ceramic grain 40 | for X-Lock angle grinder | flat

Patented LUKAS flap shape for the toughest cutting requirements in universal use – with X-Lock mounting

V2 POWER lamellar flap disc Ø 125 mm ceramic grain 40 | for X-Lock angle grinder | flat

SKU: A67441250401844
Packaging unit: 10 pcs.

Recommended use

Stainless steel
Steel
Cast material
Titanium

Benefits

Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly.
The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Outstanding removal rates are guaranteed.
A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Outstanding removal rates are guaranteed.
Your added value
High and fast removal rate, especially on hardened surfaces, scale, hard coatings and reinforced weld seams
Lightweight carrier material for low tool weight
Maximum tool life thanks to multi-layer abrasive coating
cost-effective by maximum usage of the entire abrasive coating thanks to specially shaped flaps
Also machines hard materials efficiently
High safety: unbreakable glass-fibre
Fresh abrasive coating every time: wear exposes the flaps underneath
More abrasive grains in the outer area for a high grinding speed
Secure working even at high operating speeds and temperature thanks to special resin bond
Elastic carrier material: low vibration when working
Proven quality: high level of safety by regular tests
Higher performance, work speed and better surface results than with a grinding disc
Environmentally friendly production using state-of-the-art resin curing technology
Long tool life
A glass fibre carrier facilitates an exceptional surface result thanks to its flexibility
Lower vibration – more pleasant working
For universal use
Made with top-selling carrier
Also ideal for machining weld seams
Finished faster thanks to the highest removal rate
Inexpensive to purchase
Higher safety thanks to an optimised bond of the flaps
Can be used for a long time – no glazing of abrasive grain
Excellent use of abrasive grains thanks to a flat arrangement for a long tool life
Quieter: 50% less noise than common grinding discs
Innovative tool: LUKAS exclusive
Can be used with any commercially available angle grinder thanks to 22.23 mm bore
Material
Steel and cast steel
best suitable
Alloyed/cast steels
best suitable
Tool steel
best suitable
Rust-/acid-/and heat-resistant steel and cast steel
best suitable
Cast iron
suitable
Aluminium, magnesium and copper alloys
suitable
Titanium and nickle alloys
suitable
Plastic/Wood/Rubber
suitable
More applications
Chamfering
best suitable
Drilling
-
Brushes
-
Deburring
best suitable
Fine grinding
-
Milling
-
Engraving
-
Fettling
-
Fillet weld grinding
-
Paint removal
-
Polishing
-
Precision machining
-
Cleaning
-
Conditioning
-
Rough grinding
best suitable
Weld seam machining
best suitable
Dash-dot matting
-
Cutting
-
Roughening
suitable