array(1) { ["wp-wpml_current_language"]=> string(2) "en" }
V2 Power universal lamellar flap disc Ø 125 mm zirconia alumina grain 40 dished

Patented LUKAS flap shape for tough cutting requirements in universal use

V2 Power universal lamellar flap disc Ø 125 mm zirconia alumina grain 40 dished

SKU: A27441250401465A

Recommended use

Stainless steel
Steel
Plastic and Wood
Aluminium

Benefits

The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Outstanding removal rates are guaranteed.
A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.
Your added value
Lightweight carrier material for low tool weight
Maximum tool life thanks to multi-layer abrasive coating
cost-effective by maximum usage of the entire abrasive coating thanks to specially shaped flaps
Self-sharpening effect: high removal rate especially on stainless steel
High safety: unbreakable glass-fibre
Fresh abrasive coating every time: wear exposes the flaps underneath
More abrasive grains in the outer area for a high grinding speed
Secure working even at high operating speeds and temperature thanks to special resin bond
Extremely hard and sharp for an impressively long tool life
Elastic carrier material: low vibration when working
Higher performance, work speed and better surface results than with a grinding disc
Environmentally friendly production using state-of-the-art resin curing technology
Also machines hard materials efficiently
A glass fibre carrier facilitates an exceptional surface result thanks to its flexibility
Lower vibration – more pleasant working
Made with top-selling carrier
Also ideal for machining weld seams
Inexpensive to purchase
Higher safety thanks to an optimised bond of the flaps
Excellent use of abrasive grains thanks to a flat arrangement for a long tool life
Quieter: 50% less noise than common grinding discs
Innovative tool: LUKAS exclusive
Can be used with any commercially available angle grinder thanks to 22.23 mm bore
Proven quality: high level of safety by regular tests
Material
Steel and cast steel
best suitable
Alloyed/cast steels
best suitable
Tool steel
best suitable
Rust-/acid-/and heat-resistant steel and cast steel
suitable
Cast iron
suitable
Aluminium, magnesium and copper alloys
suitable
Titanium and nickle alloys
suitable
Plastic/Wood/Rubber
suitable
More applications
Chamfering
best suitable
Drilling
-
Brushes
-
Deburring
best suitable
Fine grinding
-
Milling
-
Engraving
-
Fettling
-
Fillet weld grinding
-
Paint removal
-
Polishing
-
Precision machining
-
Cleaning
-
Conditioning
-
Rough grinding
best suitable
Weld seam machining
best suitable
Dash-dot matting
-
Cutting
-
Roughening
suitable

Description

This efficient flap disc with crescent flaps and zirconia alumina is the perfect alternative to grinding discs or conventional flap discs. It is perfect for deburring, fettling, derusting, smoothening and weld seam machining. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc additionally stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel. Thanks to its 22.23 mm bore, this flap disc can be used with any commercially available angle grinder. Thanks to its flexibility, the lightweight, stable and elastic glass fabric carrier produces exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off the characteristics of the lamellar flap disc. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Technical information

Weight0.1125 kg
Dimensions0.14 × 0.13 × 0.13 m
Tool shape

Grain size

n max.

Product packaging

Lamellar flap disc type

Abrasive

Safety standard

V max.

Packaging labelling

Tool holder

Tool holder dimension

Tool diameter

Tags