array(1) { ["wp-wpml_current_language"]=> string(2) "en" }
V2 Power universal lamellar flap disc Ø 178 mm zirconia alumina (with active abrasive surface layer) grain 40 | flat

V2 Power: optimised for machining stainless steel materials

V2 Power universal lamellar flap disc Ø 178 mm zirconia alumina (with active abrasive surface layer) grain 40 | flat

SKU: A27441780401445
Packaging unit: 10 pcs.

Recommended use

Stainless steel
Steel

Benefits

The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Outstanding removal rates are guaranteed.
The abrasive surface layer of the abrasive cloth makes it easier for you to work with it. Thanks to the cool grinding, blue discolouration and glazing are a thing of the past.
A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.
The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Outstanding removal rates are guaranteed.
Your added value
Lightweight carrier material for low tool weight
Maximum tool life thanks to multi-layer abrasive coating
cost-effective by maximum usage of the entire abrasive coating thanks to specially shaped flaps
No blue discolouration means less reworking
Self-sharpening effect: high removal rate especially on stainless steel
High safety: unbreakable glass-fibre
Fresh abrasive coating every time: wear exposes the flaps underneath
More abrasive grains in the outer area for a high grinding speed
Finished faster thanks to the highest removal rate
Secure working even at high operating speeds and temperature thanks to special resin bond
Extremely hard and sharp for an impressively long tool life
Elastic carrier material: low vibration when working
Higher performance, work speed and better surface results than with a grinding disc
Can be used for a long time – no glazing of abrasive grain
Environmentally friendly production using state-of-the-art resin curing technology
Also machines hard materials efficiently
A glass fibre carrier facilitates an exceptional surface result thanks to its flexibility
Lower vibration – more pleasant working
Made with top-selling carrier
Also ideal for machining weld seams
Inexpensive to purchase
Higher safety thanks to an optimised bond of the flaps
Excellent use of abrasive grains thanks to a flat arrangement for a long tool life
Quieter: 50% less noise than common grinding discs
Innovative tool: LUKAS exclusive
Can be used with any commercially available angle grinder thanks to 22.23 mm bore
Proven quality: high level of safety by regular tests
Material
Steel and cast steel
suitable
Alloyed/cast steels
suitable
Tool steel
suitable
Rust-/acid-/and heat-resistant steel and cast steel
best suitable
More applications
Chamfering
best suitable
Drilling
-
Brushes
-
Deburring
best suitable
Fine grinding
-
Milling
-
Engraving
-
Fettling
-
Fillet weld grinding
-
Paint removal
-
Polishing
-
Precision machining
-
Cleaning
-
Conditioning
-
Rough grinding
best suitable
Weld seam machining
best suitable
Dash-dot matting
-
Cutting
-
Roughening
suitable