array(1) { ["wp-wpml_current_language"]=> string(2) "en" }
V4 PURPLE POWER universal lamellar flap disc Ø 125 mm ceramic grain 36 dished

Patented LUKAS flap shape for most exceptional grinding performance in industrial applications and for use with robot systems

V4 PURPLE POWER universal lamellar flap disc Ø 125 mm ceramic grain 36 dished

SKU: A274812503600475
Packaging unit: 5 pcs.

Recommended use

Titanium
Stainless steel
Steel
Cast material

Benefits

Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly.
The tool's steel carrier plate is exclusively available from LUKAS. The stable and robust carrier offers maximum reliability (no breakage) and is therefore also suitable for use with robot systems. The good heat dissipation also ensures cool grinding and practically eliminates the need for reworking.
Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
Your added value
High and fast removal rate, especially on hardened surfaces, scale, hard coatings and reinforced weld seams
Maximum tool life thanks to multi-layer abrasive coating
Also machines hard materials efficiently
No blue discolouration thanks to optimised heat dissipation: less reworking needed
Fresh abrasive coating every time: wear exposes the flaps underneath
Secure working even at high operating speeds and temperature thanks to special resin bond
Also ideal for use with robot systems
Environmentally friendly production using state-of-the-art resin curing technology
Long tool life
For universal use
Finished faster thanks to the highest removal rate
LUKAS exclusive
Can be used for a long time – no glazing of abrasive grain
Can be used with any commercially available angle grinder thanks to 22.23 mm bore
Proven quality: high level of safety by regular tests
Material
Steel and cast steel
best suitable
Alloyed/cast steels
best suitable
Tool steel
best suitable
Rust-/acid-/and heat-resistant steel and cast steel
best suitable
Cast iron
best suitable
Aluminium, magnesium and copper alloys
suitable
Titanium and nickle alloys
best suitable
More applications
Chamfering
best suitable
Drilling
-
Brushes
-
Deburring
best suitable
Fine grinding
-
Milling
-
Engraving
-
Fettling
-
Fillet weld grinding
suitable
Paint removal
-
Polishing
-
Precision machining
-
Cleaning
-
Conditioning
-
Rough grinding
best suitable
Weld seam machining
best suitable
Dash-dot matting
-
Cutting
-
Roughening
suitable

Description

This extremely powerful flap disc with crescent flaps is the perfect and improved alternative to grinding discs or conventional flap discs in industrial applications. Thanks to its extremely good removal performance and service life, it is ideally suited for use on grinding robots, automatic grinding machines or powerful power tools. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the innovative ceramic abrasive grain, the flap disc always stays perfectly sharp. During use, ceramic particles break off and make space for new ones with sharp cutting edges. Tool replacement is significantly reduced – lowering tool costs. Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly. Thanks to its 22.23 mm bore, this flap disc can be used with any commercially available angle grinder. The steel carrier of this flap disc is only available from LUKAS. The stable and robust carrier offers maximum reliability (no breakage) and is therefore also suitable for use with robot systems. The good heat dissipation also ensures cool grinding and practically eliminates the need for reworking. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Technical information

Weight0.27 kg
Dimensions0.135 × 0.125 × 0.135 m
Tool shape

Grain size

n max.

Product packaging

Lamellar flap disc type

Abrasive

Safety standard

V max.

Packaging labelling

Tool holder

Tool holder dimension

Tool diameter

Tags