Anything but superficial – taking polishing to the next level!
Professional surface finishing is a challenge for every user. Especially when it comes to polishing, really good results often require the right training as well as much skill and experience. However, with the right tool from LUKAS you can simplify your work enormously.
Polishing is the supreme discipline of surface finishing – but that does not mean it has to be just as complicated! Even with just one machine and a few simple steps, you can quickly achieve your desired polishing results. With the P6PT-P polishing disc set from LUKAS you can polish from rust to a mirror finish in just four steps without changing tools.
Although recommended for use on stainless steel, steel, titanium and cast iron, the discs in this set also produce excellent work results on stone and glass. Use the polishing discs in the following order to achieve a mirror finish:
- Grit size 150
- Grit size 240
- Grit size 400
- Grit size 800
All four polishing discs can be used without changing tools. LUKAS has augmented the disc with the innovative and keyless X-LOCK mounting system. This allows the discs to be swapped in a matter of seconds with just one click. Simply place the disc on the spindle of the required angle grinder with the X-LOCK mounting system and press lightly until it engages – done. The change is quick and easy with no additional tools.
The proven LUKAS glass-fibre fabric carrier of the polishing discs – as usual – provides for the best surface results due to its flexibility. In addition, it is unbreakable and allows working with comparatively little vibration as well as simple enhancement of the surface quality.
The P6PT polishing discs convince not only on account of their especially long tool life. Thanks to the cool grinding and low sparking, these silicon carbide discs are even approved for use in aerospace engineering. The perfectly matched abrasive grain and bond provide for a long service life. Furthermore, the hard abrasive grain on all four discs enables efficient machining of hard materials such as high-alloy steels or glass. The polishing disc can be used to maximum effect for both dry and wet grinding as it does not require any additional grinding paste. Polishing pastes as well as cloth and felt discs can also be replaced by the discs from the set.
The characteristics of parts and components, both functional and aesthetic, are decisively rated by the quality of their material surfaces. To improve the surface quality in its roughness and the usability of surfaces with greases, oils, water or paints requires much know-how and skill, but also good training.
The LUKAS polishing disc set, comprising four polishing discs harmonised for ideal results, takes you from rusty steel to a mirror finish with no problems at all. Attached to an adjustable angle grinder with the X-LOCK mounting system, the polishing discs from the set with the X-LOCK system with the grit sizes 150, 240, 400 and 800 are the ideal team for polishing without pastes or cloth or felt discs.
The benefits of the LUKAS X-LOCK system polishing disc set at a glance:
- Optimised for many different surfaces: stainless steel, steel, titanium, cast iron, glass and stone
- Simple cleaning, derusting and removal of paint and coatings
- Replaces cloth discs, felt discs and polishing pastes
- Can be used on standard controlled angle grinders or X-LOCK angle grinders
- Clean working conditions, as no grinding paste is required
- Fast tool changing with one click
Think about occupational health and safety when polishing!
Polishing generates abrasive dust. Certain safety regulations must be observed when working with surface finishing machines and tools. PPE, work clothing and footwear are important for your safety at the workplace. We recommend safety goggles and ear muffs from LUKAS as basic equipment for polishing and/or grinding work.
All four polishing discs with X-Lock system have a single-piece abrasive surface. This reduces disc wear and optimises grain adhesion: Benefits for the user.